| Customization: | Available |
|---|---|
| Accuracy: | ±0.2%~±0.15%, ±0.2-0.5% |
| Size: | Dn1.5~Dn200 |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Introduction
DMF-1-Series Coriolis Mass Flow Meters' measuring principle is based on the controlled generation of Coriolis forces. The measurement would not be affected by the pressure, temperature, viscosity, density, etc. And the compensation calculation is not required. The structure contains two parts: Sensor & Transmitter. The Coriolis Mass Flow Meters are designed and manufactured based on the national standard of safe explosion proof. The Explosion- proof standard is EX d ib II C T5 Gb.| Applications |
Suitable for Liquid, Gas, Liquid- Solid, Gas- Solid, Liquid- Gas Mass Measurement or volume measurement |
| Material of the Measurement Pipeline | SS 316L/ HC Hastelloy |
| Pressure | Please refer to the chart shown above. Special orders would be placed for high pressure. |
| Medium Temperature |
-50ºC~+150ºC; (Highest Temperature: +350ºC; Lowest Temperature: -300ºC could be special ordered.) |
| Environment Temperature | Sensor:-40ºC~+150ºC; Transmitter:-20ºC~ +70ºC |
| Flow Rate Measurement Accuracy | ± 0.2% ,± 0.1% optional |
| Density Measurement Accuracy | ±0.002g/cm³,±0.001g/cm³ optional |
| Repeatability | ±0.10% Flow Rate ±[½(Zero Point Stability/Flow Rate)×100]% Flow Rate |
| Output Signal |
4~20mA Load Resistance <500Ω(Instantaneous or Density optional); 0~10kHz Instantaneous Flow Rate Pulse Signal; Standard RS 485 Communication |
| Explosion- Proof Symbol | EX d ib II C T5 Gb |
Model |
DN | Measurement scope ( kg/h ) | Work Pressure ( MPa ) | Connection type (mm) |
| DMF-1-1-AB | 1.5 | 0~4 | 0~32 | Weld Joints Φ6×1.5 |
| DMF-1-1-A | 3 | 0~40 | 0~32 | Weld Joints Φ6×1.5 |
| DMF-1-1-B | 6 | 0~100 | 0~25 | Weld Joints Φ10×2 |
| DMF-1-2-A | 8 | 0~200 | 0~20 | Weld Joints Φ10×1 |
| Model |
DN |
Measurement scope (kg/h) | Work Pressure (MPa) | Connection Type(mm) |
| DMF-1-3-A | 10 | 0~500 | 0~25 | Weld Joints Φ20×4 |
| DMF-1-3-B | 15 | 0~1000 | 0~25 | Weld Joints Φ20×3 |
| DMF-1-4 | 20 | 0~3000 | 0~25 | Weld Joints Φ20×2 |
| DMF-1-5-A | 25 | 0~10000 | 0~25 | Weld Joints Φ31×3 |
| Model |
DN |
Measurement scope (t/h) | Work Pressure (MPa) | Connection Type(mm) |
| DMF-1-3-A | 10 | 0-0.5 | 0~4 | Flange 10 |
| DMF-1-3-B | 15 | 0-1.0 | 0~4 | Flange 15 |
| DMF-1-4 | 20 | 0-3.0 | 0~4 | Flange 20 |
| DMF-1-5-A | 25 | 0-10 | 0~1.6 | Flange 25 |
| DMF-1-5-B | 40 | 0-20 | 0~1.6 | Flange 40 |
| DMF-1-6-A | 50 | 0-30 | 0~1.6 | Flange 50 |
| DMF-1-6-AB | 65 | 0-50 | 0~1.6 | Flange 65 |
| DMF-1-6-B | 80 | 0-100 | 0~1.6 | Flange 80 |
| DMF-1-6-C | 100 | 0-150 | 0~1.6 | Flange 100 |
| DMF-1-6-CD | 125 | 0-200 | 0~1.6 | Flange 125 |
| DMF-1-6-D | 150 | 0-300 | 0~1.6 | Flange 150 |
| DMF-1-6-E | 200 | 0-500 | 0~1.6 | Flange 150 |
){kind=link}