| Customization: | Available |
|---|---|
| Principle: | Reflex Level Gauge |
| Range: | 0-3m |
|
Still deciding? Get samples of US$ 600/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Reflex glass level gauges working principle is based on the light refraction and reflection laws.
Reflex glass level gauges use glasses having the face fitted towards the chamber shaped to have prismatic grooves with section angle of 90°. When in operation, the chamber is filled with liquid in the lower zone and gases or vapors in the upper zone; the liquid level is distinguished by different brightness of the glass in the liquid and in the gas/vapor zone. The reflex level gauges do not need a specific illumination: the day environmental light is enough. Only during the night an artificial light must be provided.
The 90 degree Quick open/close type glass plate level gauge is composed of two quick opening valves, intermediate indicating device, etc. The handle is rotated 90 degrees to quickly control the opening and closing of the valve.open the valve, and the medium flows into the middle indicating device through the valve, so that the liquid level can be clearly reflected through the glass plate within the effective transmittance range of the glass plate level gauge.
Applications
Reflex glass level gauges can be used in most of the cases and offer great advantages in terms of: low initial cost, low operating cost, easy level reading.
Features:
1. They do not need electrical power to operate. This can be a great advantage in the case of a power outage.
2. Simple to install - no calibration is necessary.
3. Can be used as a reference to check, or calibrate, other level technologies.
4. Pressure rating from vacuum to 4Mpa.
5. Temperature rating from -20ºC to 450ºC
6. Not affected by the chemical or electrical properties of the process liquid.
7. Specific gravity, dielectric, conductivity, surface turbulence, vapor, foam, etc. no longer needs to be considered.
|
Model
|
TBS-F
|
TBS-A
|
TBS-HR
|
TBS-HT
|
RFL-40C
|
|
Type
|
Reflex type
|
Transparent type
|
High pressure reflex type
|
High pressure Transparent type
|
90 degree Quick open/close type
|
|
C-C
(mm)
|
300-3600
|
285-2590
|
|||
|
Visible Length
(mm)
|
95-3360
|
141-2433
|
|||
|
Level Gauge Material
|
CS,SS304,SS316L,Ti,etc
|
Cast steel
|
|||
|
Glass Material
|
Borosilicate; Alumina-silicate
|
||||
|
Gasket Type
|
Graphite composite gasket; non-Asbestos gasket; Mica seal components
|
||||
|
Working temperature
ºC
|
≤450ºC
|
||||
|
Working pressure
Bar
|
40 (Groove glass)
100 (Plate glass)
|
100 (Plate glass)
|
40 (Groove glass)
160 (Plate glass)
|
160 (Plate glass)
|
40 (Groove glass)
|
Hebei Xukang Meter Manufacturing and Tianjin U-ideal Instrument Co., Ltd as a group, have more than 20years products research and development experience. And have 16years export experience, 5000m2 factory, tens of new machines.
Hebei Xukang Meter Manufaturing Co. Ltd adopts a combination marketing of domestic and foreign trade, having a marketing network across the country and abroad. We will try to provide customers the best quality and service through integrating the best resource and to become the excellence corporation. Our products strictly enforce the ISO9001 quality management system, and provide customer a safe product.
Our products range:
1. Flowmeter: Electromagnetic flowmeter, ultrasonic flowmeter, vortex flowmeter, gear flowmeter, rotor flowmeter, mass flowmeter, etc
2. Level gauge: Magnetic float level gauge, glass plate level gauge, glass tube level gauge, ultrasonic level gauge, oil level gauge, float switch, radar level gauge, etc.
3. Sight Glass: Straight sight glass, tube sight glass, flange sight glass, three way sight glass etc.
4. Strainers: Quick Open Basket Filter Strainer,Y Type,T Type,Basket Strainer,Self -Cleaning Strainer,Industrial Duplex Basket Strainer,Intelligent Control Self-Cleaning Piping Strainer,etc.
5. Valves: air valve, Strainer, gate valve, check valve, globe valve, ball valve, butterfly valve, pressure reducing valve, control valve, safety valve, angle valve, Titanium alloy valve, thermostatic valve, needle valve, plug valve, etc.
6. Flanges and Pipe fittings:all kinds of flanges, elbow, tee, caps, union,plug,coupling,reducer, pipes and steels etc.
1. who are we?
We are based in Hebei, China, start from 2017,sell to Domestic Market(15.00%),Mid East(12.00%),South America(10.00%),Southeast Asia(10.00%),Eastern Asia(10.00%),North America(9.00%),Northern Europe(8.00%),Africa(5.00%),South Asia(5.00%),Southern Europe(5.00%),Eastern Europe(5.00%),Central America(2.00%),Oceania(2.00%),Western Europe(2.00%). There are total about 51-100 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Level Indicator,Level sensor,Level Switch,Flow Meter,Pressure sensor
4. why should you buy from us not from other suppliers?
20 years export experience. We are group company with Tianjin U-ideal Instrument Co., Ltd. More than 20years for products Research and development. 5000m2 factory, high-precision machines. Level gauge, flowmeter and pressure sensor have top quality
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,CIP,CPT,DDP,DDU,Express Delivery;
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,L/C,MoneyGram,Credit Card,PayPal,Western Union,Cash;
Language Spoken:English,Chinese
){kind=link}