Product Description
Turbine Flow meter
1. Product Features
Medium temperature: -20~+120º C
Ambient temperature: -20~+55º C
High quality turbine resulting in wider measurement range than conventional ones
Various types of transducers for different applications
The unique Multi-point intelligent non-linear correction to the instrument coefficient
Accuracy assurance due to the standard flow calibration facilities
100% pressure experiment, 100% products quality inspection
Power-Off Protection: The instrument coefficient and the accumulative flow value can be saved for ten years without power
2. Basic Parameters
Sensors of which diameter ranges from DN4 to DN40 are screw thread connection and the maximum pressure tolerance is 6.3Mpa
Sensors of which diameter ranges from DN50 to DN200 are flanged connection and the maximum pressure tolerance is 6.3Mpa
Sensors of which diameter ranges from DN4 to DN40 have straight pipes and filters upstream and downstream.
Our company supplies upstream and downstream straight pipes for the sensors with their diameters lager than DN15
| Meter diameter and connection method |
4,6,10,15,20,25,32,40 apply thread connection |
| (15,20,25,32,40)50,65,80,100,125,150,200 apply flange connection |
| Accuracy class |
± 1%R ,±0.5% |
| Measuring scale ratio |
1:10;1:15;1:20 |
| Material |
304 stainless steel,316(L)stainless steel and others |
| Fluid temperature |
-120~+ 12 0ºC |
| Environment |
Temperature-10~+ 5 5ºC,relative humidity5%~90%,air pressure86~106Kpa |
| Output signal |
Impulse signal,low leve l≤0.8V high level ≥8V |
| Power supply |
+12VDC,+24VDC(selective) |
| Signal transmission line |
STVPV3*0.3(Three line system)or 2*0.3(2-line system) |
| Transmission distant |
≤ 1000m |
| Signal wire connection |
Inner thread M20*1.5 |
| Explosion proof class |
ExdIIBT6
|
| Protection class |
IP65 |
- Split structure design: Separated turbine sensor and display transmitter connected by cable. The display head can be mounted far away from high-temperature pipelines, suitable for narrow installation space.
- Compact small-bore threaded body, easy inline installation without large flanges.
- Turbine measuring principle, fast response, stable measurement, high repeatability.
- Explosion-proof LCD display transmitter. Shows instantaneous flow, cumulative flow and medium temperature; on-site parameter setting via buttons.
- SS316L stainless steel wetted parts, anti-corrosion, applicable for compressed air, nitrogen, oxygen, argon and other gases.
- Multiple signal outputs optional: 4-20mA, RS485 Modbus-RTU, pulse signal, compatible with PLC & DCS systems.
- External thread connection (G / NPT customizable). Equipped with transmitter mounting bracket for convenient installation, disassembly and maintenance.
- Low pressure loss, wide measuring range, suitable for gas supply, purging, laser gas and nitrogen generator systems.
FAQ
Q1: What advantages does split turbine flow meter have over integrated type?
A: The turbine sensor and display transmitter are separated. If the pipeline works under high temperature, the transmitter can be installed in normal temperature area to avoid overheating damage. It is also convenient for reading and operation in limited space
Q2: What gases can be measured? Can it measure humid gas?
A: Suitable for dry clean gas including air, nitrogen, oxygen, argon, CO2. Water vapor, oil dirt and particulate impurities will wear turbine impeller and affect accuracy, humid or dirty gas is not recommended.
Q3: Can thread specification and measuring range be customized?
A: Yes. We support custom NPT/G external threads and customized flow ranges. Technical drawings can be provided on request.
Q4: Does it support simultaneous output of 4-20mA and RS485 signals?
A: Yes. Combined signal output version is available to realize analog and digital communication at the same time.
Q5: Can the connecting cable be extended? What is the maximum length?
A: Standard cable length is 3m. Longer cable can be customized, normally maximum 10m. Please consult our technical team for extra long distance.
Q6: Any requirements for installation? Can it be installed on horizontal and vertical pipes?
A: It can be installed on horizontal and vertical pipelines. Enough straight pipe sections are required upstream and downstream. Avoid installation near elbows, valves and other flow-disturbing components to ensure measurement accuracy.
Detailed Photos
Company Profile

Certifications

Packaging & Shipping
