Vacuum magnetic flap level gauge water oil measurement tank level meter
Tianjin U-ideal Instrument Co., Ltd produces various level measuring instruments such as magnetic level gauges, glass tubular level gauges, reflex level gauge, transparent level gauge, various level transmitters and level switches.
magnetic level gauge devices are designed with the lifting force of liquids and electromagnetism thrust and pulling force.The magnets in the float that enable you to follow the liquid change level with the help of red-white colored flaps placed on ther outher wall.
Application Areas
• All steam and hot water boilers
• Waste water systems
• Filling and unloading containers
• All chemical and petrochemical tanks
• Tanks for petroleum and petroleum products
• Oil boilers
• Diesel fuel tanks and generator sets
• Submarine, helicopter and ship fuel tanks
Level Gauge' outstanding features: Bi-color local indicating, remote control, wide working range, Economic price, long service time, and little maintenance.
Level measurement methods
Components: Tube body, floater, installed flanges, indicator panel, and drain and vent valves.
Indicate color: White and Red flag.
Range of application
SeriousGlass Sheet Level Gauge is a kind of sight glass level gauge which can show the liquid level directly. These type level gauges are widely used in boiler steam water level, tank level in chemical industries or petroleum field etc.
Technique Parameters:
Glass type: borosilicate glass/mico/quartz glass tube
Gasket material: graphite gasket
Pressure for steel ball shut off automatically: ≥0.2Mpa
Steam pressure: ≤0.6Mpa. Steam sheath joint: G1/2″male thread
Measure range: 300~3000mm
Working temperature:-20~450ºC
Working pressure: 0.6MPa, 2.5Mpa, 4.0MPa, 6.3MPa, 16MPa
Meter material: carbon steel, SS304 or SS316.
Transmitcolor: nature color, or bi-color type (green for liquid, red for air) Ordinary globe valve or 1/4 opens or close valve.
Lamp lighting: fluorescent lamp power supply AC36V
Glass sizes: 140mm, 165mm, 190mm, 218mm, 260mm, 280mm, 290mm, 320mm,
340mm;
Connection center to center distance 10mm adjustable.
Installation
If the meter without light equipment, it can be installed at the light bright place. The flange and the sealing face can't be
damaged for contaminated.
If the measure range is very wide and must use serious meter to measure, their installing place should be separated without blind zone.
When use the level gauge, water pressure should be check firstly, and the pressure the meter can bear is no more than 1.5 times of the maximum pressure. The test must conform to the pressure vessel safely requirement of the relative department.
When install series TBS meter, the top and bottom needle valves must be closed. When operating, firstly open the top needle valve to its maximum degree and then open the bottom needle valve slowly to lead the fluid into the meter. And then loose the vent valve to vent gas. After vent out the gas then tight the vent valve immediately. When turning the needle valves.
Ordering instructions
Model No. and specifications; Measuring ranges;
Working pressure and temperature
our company
packing
){kind=link}
){kind=link}