| Warranty: | 1 Year |
|---|---|
| Accuracy: | ≤±0.1% |
| Main Application: | Corrosive Liquid/Gas, Gas |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Thermal gas mass flow meter is designed on the basis of thermal dispersion, and adopts method of constant differential temperature to measuring gas flow. It has advantages of small size, easy installation, high reliability and high accuracy, etc.
The meter contains two platinum resistance temperature sensors. The thermal principle operates by monitoring the cooling effect of a gas stream as it passes over a heated sensor. Gas flowing through the sensing section passes over two sensors one of which is used conventionally as a temperature sensor, whilst the other is used as a heater. The temperature sensor monitors the actual process values whilst the heater is maintained at a constant differential temperature above this by varying the power consumed by the sensor. The greater the gas velocity, the greater the cooling effect and power required to maintain the differential temperature. The measured heater power is therefore a measure of the gas mass flow rate.
Main Features:
1,Different gas coefficient arbitrarily set.
2,Show multiple sets of values.
3,Output analog calibration.
4,Multi-point non-linearcurve correction.
5,Wide range ratio measurement 50:1 / 100:1 /max1000:1.
6,Large diameter small flow accurate measurement.
7,On-site instrument can be set.
8,Close to zero pressure loss of the closed sensor.
9,Straight pipe requirements smaller, 1D-2D canachieve high-precision measurement.
10,Measured value and pressure has nothing to do,the real mass flow detection.
11,Expert algorithm to achieve high precision and stability of the instrument less than one second response time.
12,LCD display, with Multiple display interface.
| Thermal gas mass flowmeter | |
| Measuring Medium | Various gases (Except the acetylene) |
| Pipe Size | DN10~DN4000mm |
| Velocity | 0.1~100 Nm/s |
| Accuracy | ±1~2.5% |
| Working Temperature |
Sensor: -40ºC~+550ºC Transmitter: -20ºC~+45ºC |
| Working Pressure | Insertion Sensor: medium pressure≤ 1.6MPa Flanged Sensor: medium pressure≤ 1.6MPa Special pressure please contact us |
| Power Supply | Compact type: 24VDC or 220VAC, Power consumption ≤18W Remote type: 220VAC, Power consumption ≤19W |
| Output | 4-20mA (optoelectronic isolation, maximum load 500Ω), Pulse, RS485 (optoelectronic isolation) and HART |
| Alarm Output | 1-2 line Relay, Normally Open state, 10A/220V/AC or 5A/30V/DC |
| Sensor Type | Standard Insertion, Hot-tapped Insertion and Flanged |
| Construction | Compact and Remote |
| Pipe Material | Carbon steel, stainless steel, plastic, etc |
| Display | 4 lines LCD Mass flow, Volume flow in standard condition, Flow totalizer, Date and Time, Working time, and Velocity, etc. |
| Protection Class | IP65 |
| Sensor Housing Material |
Stainless steel (316) |
| Applicable media | Dry gas, air which doesn't contains water. |
| Measuring range | 0.05-141m/s (at standard conditions 20ºC, 0.101325MPa), if flow velocity out of this range, please consult with the manufacturers customization |
For small order quantity,we can send them to you by express delivery,TNT,DHL,UPS OR EMS etc. For big order quantity ,we will advise you to use Air Shipping or Sea Shipping through your nominated forwarder agent or our long-term cooperated agent.
1. who are we?
We are based in Hebei, China, start from 2017,sell to Domestic Market(15.00%),Mid East(12.00%),South America(10.00%),Southeast Asia(10.00%),Eastern Asia(10.00%),North America(9.00%),Northern Europe(8.00%),Africa(5.00%),South Asia(5.00%),Southern Europe(5.00%), Eastern Europe(5.00%),Central America(2.00%), Oceania(2.00%),Western Europe(2.00%). There are total about 51-100 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Level Indicator,Level sensor,Level Switch,Flow Meter,Pressure sensor
4. why should you buy from us not from other suppliers?
20 years export experience.
We are group company with Tianjin U-ideal Instrument Co., Ltd.
More than 20years for products Research and development.
5000m2 factory, high-precision machines.
Level gauge, flowmeter and pressure sensor have top quality
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,CIP,CPT,DDP,DDU,Express Delivery;
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,L/C,MoneyGram,Credit Card, PayPal,Western Union,Cash;
Language Spoken:English,Chinese
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}