Side Mounted Boiler Water Fuel Level Gauges-Magnetic Float Level Gauge with 4-20mA

• Type: Floating Ball
• Contact: Contact
• Output Signal Type: Analog Type
• Production Process: Normal Wirewound
• Feature: Corrosion Resistant
• Material: Stainless Steel
• Model NO.: UHC-C
• IP Rating: IP67
• Certification: ISO
• Customized: Customized
• Level Controller and Remote Indicator: Liquid Level Transmitter
• Stainless Opitional: PP, PVC, SS304, SS316 Stainlesss Steel Material
• Suitable Liquid Name: Water, Diesel Oil, Steam, Milk, Bear
• Principle: Magnetic Floating Ball Sensors
• Installation Method: Side Mounted, Top-Mounted
• Output: 4-20mA, Hart, RS485, LCD Field Display
• Measuring Accuracy: 3mm, 5mm, 10mm, 20mm
• Remote Control: Low Level Switches, High Level Control Switch
• Level Switch Type: Explosion-Proof, Non-Explosion-Proof
• Switch Signal: Normally Open, Normally Close, Holding Signal
• Transport Package: Wooden Case or Carton
• Specification: 0~10m
• Trademark: U-ideal
• Origin: Tianjin, China
• HS Code: 90261000
• Production Capacity: 5000

Product Description

Features 

1. Easy to install, no extra piping required in most applications
2. Magnetic level gauge Visual level indication up to 30m, sections made suit for delivery. Magnetostrictive level indicator can reach 30m measure range with cable insertion.
3. Ideal for high-temperature, high-pressure and corrosive applications.
4. Magnetostrictive and radar transmitter options for non-invasive and/or redundant level control.
5. Available with HART, 4~20mA, and level switches.

Float Gage Material	SS304, SS316, PTFE, PP, PVC, PVDF
Max. Centre to Centre Distance	6000 mm, greater lengths on request
Connecting Flanges	According to DIN or ANSI B16.5
Temperature of Liquid	450ºC (Max.) for SS, 80ºC (Max.) for PVDF 60ºC (Max.) for PVC, 50ºC (Max.) for PP
Specific Gravity	Min. 0.45
Scale	Graduated in cm, Aluminium or SS304
Measuring Accuracy	+/- 5 mm

U-ideal mounting styles



Typical pictures of magnetic level indicators

Model Selection Table
Basic selection of magnetic level indicator please refer to the following steps:
 

UHC-	C	Side mounted;
	D	Top mounted
	O	Other
	Signal	Y	Standard transmitter 4~20mA current signal (Resolution: 20mm/10mm/5mm);
		Y3	Magneticostrictive transmitter 4~20mA
		H	Hart;
		A	Switch and number;
		L	transmitter with LCD
			No signal output
	Indicator type		O	Ordinary pannel
			S	Sealed bargraph
			L	Red/Green flaps with LED lamp
	Structure			S	Steam tracing
				E	Electric heating
				F	Defrost
	Valve				D	Drain valve or drain plug
					DV	Drain valve and Vent valve or plug
					N	No valve
	Working temperature					A	Ambient temperature (0~40ºC)
						M	-20~200ºC
						H	High temperature (<400ºC)
						L	If easy frozen
	Material						SS304	0Cr18Ni9
							SS316L	022Cr17Ni12Mo2
							SS321	0Cr18Ni10Ti
							PP	PP (Polypropylene),PVC,PVDF
							PTFE	stainless steel lined with PTFE
	Explosion-proof							S	Safety environment
								E	Explostion-proof ExdII BT4
								I	intrinsic safety ExibII CT4
	Measure range								Unit: mm
	Fluid density								g/cm3
	working pressure								Unit: MPa
	Flange size, rate and standard								ANSI	DIN	JIS
Example: UHC-C-YA-O-D-M-SS304-S-500-0.8-1-DIN DN25 PN16

Remark: Manufactured customized is available for this product.
Can be made to Sections if gauge is longer than 3m to make suitable for delivery.

Special working conditions magnetic level gauge
UHC - V side-top mounted high viscous liquid Float level gauge

UHC - V side-top mounted high viscous liquid type Float level gauge is suitable for the petrochemical tank liquid level measurement system, and especially suitable for heavy oil, tar, crude oil, resin of high viscosity medium liquid level detection. 
Features:

1. C-C: 500 ~ 10000 mm, long gauge can be section made.
2. Process connection: size DN6 ~ DN200, flange standards (GB, JB/T, HGJ, ANSI, DIN, etc).
3. Lead tube material: 304SS; 316SS; 316L
4. Float material: 304SS; 316L, Titanium
5. Working pressure: 0 ~ 1.6 MPa
6. Working temperature: - 20 ~ 200 ºC
7. Accuracy: + / - 10 mm
8. Medium density: 0.65 ~ 2.0 g/cm3
9. Medium viscosity: 1.5 Pa s. or less

Model Selection:

UHC-V

Top-side mounted high viscosity fluid type float level gauge

L

drain valve

valve

B

SS304 or stainless steel 1Cr18Ni9Ti

wet material

L

316SS or 316L

150

DN150 or 6"

Connection

200

DN200 or 8"

A

Flange nominal pressure 1.0MPa

PN

B

Flange nominal pressure 1.6MPa

1

-20~80ºC

Working temperature

2

-20~130ºC

3

-20~200ºC

B

cam magnetic drive switch

switches

C

reed switch

number of switches

R1

standard transmitter 4~20mA

transmitter

R2

magnetostrictive transmitter 4~20mA

R3

magnetostrictive transmitter 4~20mA, with Hart

O

standard

ex-proof

D

flame-proof  ExdIIBT4

E

intrinsic safety ExibIICT4

height of install

width of install

measure range

fluid density

working pressure

Top mounted vaporizing fluid float level gauge
UHC -T Top mounted vaporizing fluid special using magnetic float level gauge is suitable for liquid measurement which is easy vaporization in pressure vessels, especially for buried tank of liquid level measurement such as liquefied petroleum gas, methane. This model level gauge adopts of a set of three pure titanium floats and unique guide rail structure, with stable and reliable product performance, strong practicability, now is widely used in LPG stations.
Features:

1. Measuring range: 300 ~ 3000 mm. 
2. The process connection: flange size is 6 ~ DN200, flange standards (GB, JB/T, HGJ, ANSI, DIN, etc) please declare when ordering.
3. Lead tube material: stainless steel 1Cr18Ni9Ti; 304SS; 316SS; 316L
4. Float material: Titanium
5. Working pressure: -0.1 ~ 4 MPa
6. Working temperature: - 80 ~ 80 ºC
7. Accuracy: + / - 10 mm
8. Medium density: 0.4 ~1.2 g/cm3
9. Medium viscosity: 0.4 Pa s.

 
Model Selection:
 

UHC-T	Top mounted vaporizing fluid special using float level gauge
	B	SS304 or stainless steel 1Cr18Ni9Ti									wet material
	L	316SS or 316L
		150		DN150 or 6"							process connection
		200		DN200 or 8"
			A		Flange nominal pressure 1.0MPa						nominal pressure
			B		Flange nominal pressure 1.6MPa
					1	-20~80ºC					Working temperature
					5	-80~80ºC
						B	cam magnetic drive switch				switches
						C	reed switch
							number of switches
							R1	standard transmitter 4~20mA			transmitter
							R2	magnetostrictive transmitter 4~20mA
							R3	magnetostrictive transmitter 4~20mA, with Hart
								O	standard		ex-proof
								D	flame-proof  ExdIIBT4
								E	intrinsic safety ExibIICT4
									J3	Vacuum jacketed
										height of install
										measure range
										fluid density
										working pressure