Product Description
U-ideal Instrument Co. manufacture High viscocity oil target Flowmeter, water/diesel oil turbine flowmeter, waste water electromagnetic flowmeter, steam vortex flowmeter, air natural gas thermal flowmeter, non-contact Ultrasonic Flowmeter, Handheld Ultrasonic Flow Meter, portable/wall-mounted ultrasonic flow indicators, glass rotameter flowmeters.
High Viscosity oil Flow Meter/ Target Flowmeter/ Resin Flowmeter/ Pulp Flow Meter/ Viscous Liquids Flowmeter/ Slurry Flow Meter
1. U-ideal Target flowmeter can measure oil, steam, liquid and any fluid flow which other flowmeters can't measure.
2. Target flowmeter can do with temperature and pressure compensation to improve the measure flow accuracy.
3. U-ideal target flowmeter can do signal of output 4~20mA, RS485, Hart, switch.
4. U-ideal target flow meter Installation method: Insertion type, pipe mounting, clamp-on, flange connection, threaded connection
5. Accuracy of Tianjin U - ideal Instrument Co. oil flowmeter: 0.5% for oil, liquid, 1.0% for air/steam.
Flow Meter LCD Indicating: Flow rate+total flow+working temperature+working pressure
Tianjin U-ideal target flowmeter with digital display is a completely new force induction target flowmeter Developed based on measurement principle of traditional target flowmeter, making full use of most excellent features of the same, and in combination with new transducer technology and modern digital Technology. This product not only features the characteristic of no movable part as in traditional Flowmeters such as target flowmeter, orifice flowmeter and vortex flowmeter, but also a measurement Accuracy matching that of volumetric flowmeter. In addition, this product has the performance against Interference and impurities, and is light and reliable, hence is widely used in petroleum industry, chemical Engineering, energy industry, food industry, environmental protection and water conservancy etc. UIB Digital target flow meter is improved from traditional flow meters and can take place of them, such as turbine,
Electromagnetic, ultrasonic, mass, volumetric, vane-wheel, by-pass, orifice, differential pressure flow meter...In terms of
1) Flowmeter working conditions and application
UIB flowmeter has extremely wide applicability, i. E.:
· Applicable to various pipe diameters: From Φ 15 to Φ 2000mm and larger;
· Applicable to high and low temperature media: From -196º C to +450º C;
· Applicable to high pressure operating conditions: From 0 to 42Mpa (gauge).
2)Product features:
A. · Accurate measurement of flow of fluid media such as liquid, gas, steam and viscous media etc. Under Various normal temperature, high temperature and low temperature operating conditions;
B. · Extremely high sensitivity capable of measurement of ultra small flow (minimum flow that can be
Measured is 0.08m/s;
C. · No movable part, hence high safety and reliability;
D. · High measurement accuracy and precision (reaching 0.2% for measurement of total quantity);
E. · Wide measurement range (reaching 1: 30);
F. · Good repeatability (normally 0.1~0.08%) and fast measurement;
G. · Small pressure loss, only about 1/2P of standard orifice;
H. · Dry calibration can be used, i. E. Poise hanging method;
I. · Target plate can be replaced as required to change flow measurement range;
J. · Capable of online direct reading and remote transmission/signaling;
K. · Easy installation and very easy maintenance.
| origion |
Tianjin |
| package |
Wooden Case or Carton |
| trademark |
Tianjin U-ideal Instrument |
| Body material |
SS304, SS316L |
| Caliber |
4mm-1100mm |
Detailed Photos
Company Profile
Certifications
Packaging & Shipping
){kind=link}
){kind=link}