Split Type V-Shaped Cone Flowmeter Differential Pressure Meter Cone Flowmeter

• Accuracy: 0.5%, 1%
• Main Application: Water, Wastewater, Diesel Fuel, Fuel Oil, Nature Gas, Corrosive Liquid/Gas
• Size: DN25~DN3000
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: UVC
• Sensor: Tube/Flange
• Type: Differential Pressure Flow Meter
• Measuring Media: Steam
• Measuring Principle: Mechanics
• Structure: Integrated Type and Split Type Flowmeter
• Installation: Flange Type, Wafer Type, Insertion Type
• Medium: Liquid, Air, Natural Gas, Steam
• Flow Indicater: Volume Flow and Mass Flow
• Transport Package: Wooden Case or Carton
• Specification: CE, SGS, ISO
• Trademark: U-ideal
• Origin: Tianjin, China
• HS Code: 90261000
• Production Capacity: 2000 PCS/Month
• Package Size: 50.00cm * 50.00cm * 50.00cm
• Package Gross Weight: 50.000kg

Product Description

Product Description

Flowmeter working principle:

The V-type flowmeters is a differential pressure flowmeters, it get differential pressure to reflect flow rate through throttle. Throttling set is a cone a hanging in the pipeline central. High pressure the static pressure upstream pH (positive pressure) gets from the wall before the cone, low pressure(the pressure downstream) PL (negative pressure) gets from cone central, square root of the differential pressure DP is proportional to the flow.
Product Features:

* Shorter straight pipe
Cone flowmeter adopt unique design of central streamlining throttling device, which effectively solve the problem with fluid rectifier in the long straight pipe. It hangs in the center of the pipeline a cone-shaped throttling device, impeding the flow of medium and reshaping the flow curve. And immediately forms an ideal fluid in cone upstream and downstream pipeline. Thus the requirement length of cone flowmeter is only upstream (0~3)D and downstream (0~3)D.

* High accuracy
The downstream static pressure of the cone flowmeter is high-frequency or low amplitude signals, which makes the Δ P low noise and very stable. The accuracy can be reach ± 0.5%.

* Wide flow range, low Permanent Pressure Loss
The range ratio of the cone flowmeter is 10: 1. If demand, it may be increased to 30: 1 when choosing appropriate parameters. Under the same β Value, the permanent pressure loss of the cone flowmeter is about 1/5~1/10 of the orifice plate, which greatly reduce the power consumption.

* Dirt resistance and Anti-Clogging
With "self-cleaning function", the cone flowmeter doesn't exist dead zone. The medium speed up when flowing through the cone, and clean the high pressure taping, cone body & the pipeline around the cone. Meanwhile low pressure taping is insulated by non-liquid mediums, with which dirty fluid will not contact. So, cone flowmeter can be used to measure impurities and dirty mediums easy to be crystallized.

* Measuring medium with high temperature and pressure
The highest working temperature and pressure respectively reach 800° C and 42.0MPa, which can be higher with special material.

* Measuring medium in complicated conditions
For its unique design structure, cone flowmeter can measure gas-liquid phase, multiphase flow, liquid vibration, electromagnetic interference medium and mixed gas phase etc.

Type	Name	structure & application	sensor accuracy	pressure tapping	straight pipe require	working condition	medium
LGVH-S	flange	flat welding flange	≤±0.5%	screw, socket, flange	low	T: -196~850ºC P≤2.5MPa	gas, liquid, steam, coal water slurry, dust medium
LGVH-W		weld neck flange	≤±0.5%		low	T: -196~850ºC P≤42.0MPa
LGVH-Z	direct welding	long pipeline, special using high pressure connection	≤±0.5%	screw, socket, flange	low	T: -50~200ºC P≤42.0MPa	oil, natural gas flow measurement of high pressure medium
LGVH-K	insulating jacket	outer steam or hot water heating	≤±0.5%			T: -196~850ºC P≤42.0MPa	Viscous liquid, slurry medium and other heating needed medium
LGVH-L	PTFE lining	clamp-on	≤±0.5%	flange	low	T: -196~850ºC P≤42.0MPa	corrosive chemical medium
LGVH-F	square pipe	to measure square pipe medium	≤±0.5%	screw, socket, flange	low	T: -196~850ºC P≤42.0MPa	square pipe medium
LGVH-D	clamp-on	clamp-on	≤±0.5%	screw, socket	low	T: -196~850ºC P≤42.0MPa	small size, high speed medium
LGVH-C	inserting	for large size piping	≤±0.5%	screw, socket,	Up 3D, down 1D	T: -196~850ºC P≤42.0MPa	various gas, liquid and steam
LGVH-M	sale measure	suitable for settlement	≤±0.3%	screw, socket,  flange	low	T: -196~850ºC P≤42.0MPa	various gas, liquid and steam
LGVH-Y	integrating	LCD	≤±0.5%	screw, socket,  flange	low	T: -196~850ºC P≤42.0MPa	various gas, liquid and steam

Detailed Photos

Company Profile

Certifications

Packaging & Shipping